Our Work

This Denton, TX family was tired of battling hot summers and drafty winters inside their home. No matter how hard the HVAC worked, rooms on the second floor were always too warm while the downstairs stayed chilly. Their monthly energy bills were climbing higher and higher with little comfort to show for it. Our team provided the perfect solution: spraying open-cell foam throughout the roofline. Spray foam sealed the home tight, stopping air leaks and insulating every corner. Within days, the homeowners noticed their HVAC system cycling properly, temperatures balancing across every room, and the house feeling quieter and fresher. With their Denton home now spray-foamed, the family can look forward to year-round comfort and significant energy savings for years to come.

During a major interior remodel, this Plano, TX home needed its attic brought up to the same standard as the rest of the house. The attic was in rough condition with old, dusty insulation that had lost its effectiveness. Our team gave the space a complete refresh: removing all the outdated insulation, carefully inspecting attic components for water damage or wear, sanitizing the space, sealing air leaks, and blowing back in 13" of Jet Stream® Ultra insulation. The result is a cleaner, healthier attic with improved energy efficiency, helping the remodel deliver comfort and performance for years to come.

This large Southlake home had an attic reaching over 140°, with heat transferring through a massive vaulted ceiling and keeping the living room stuck at 84° or higher. The HVAC system ran nonstop day and night, and the family’s energy bills were climbing toward $1,000 per month. Our team removed the old, inadequate insulation and spray foamed the underside of the roof deck. This transformed the attic into a semi-conditioned space, keeping it within 5° of the home’s living area. As a result, the HVAC system finally cycled off, stress on the equipment was reduced, energy bills dropped, and the homeowners regained control of their comfort.

This 3,000 sq. ft. two-story home in Irving, TX was uncomfortable year-round, with uneven temperatures across every room. The homeowners were also facing energy bills close to $600 per month. To make matters worse, their HVAC system had just broken down and required a major repair. Their HVAC professional recommended upgrading their attic insulation to reduce strain on the system and protect it from future damage. Our team removed all the old, underperforming insulation, sanitized the attic, sealed air leaks in the sheetrock, and installed 17" of Jet Stream® Ultra blown-in insulation throughout. Immediately, the HVAC system began cycling properly instead of running nonstop, delivering consistent comfort across both floors. With their attic properly insulated, the homeowners can expect lower energy bills and a longer-lasting HVAC system.

For this new construction home in Southlake, TX, our team installed 3.5" of AccuFoam® OC spray foam on the walls, carefully shaving it down to make the space sheetrock-ready. Spray foam creates an airtight barrier that dramatically improves energy efficiency, indoor comfort, and long-term durability. Homeowners who choose spray foam insulation can see up to a 45% reduction in monthly energy bills, while also enjoying quieter interiors and greater protection against outdoor allergens and pollutants. This Southlake project is set up for lasting comfort, efficiency, and performance from day one.

This Waco, TX home was struggling with extreme heating and cooling issues—rooms that were impossible to keep comfortable and monthly energy bills nearing $500. On top of that, the family noticed constant dust buildup inside the home, traced back to the attic’s old, deteriorating insulation. Our team stepped in to provide a complete solution. We removed all the outdated insulation, sanitized the attic, sealed gaps and cracks contributing to air leaks, and installed 13" of Jet Stream® Ultra blown-in insulation. The upgrade created a cleaner, healthier environment with reduced dust, while stabilizing indoor temperatures and easing the strain on the HVAC system. The homeowners can now enjoy improved comfort and expect to see a noticeable drop in their utility bills.

This Fort Worth customer wanted to enjoy working on his sports cars year-round, but summer temperatures inside his metal building soared to nearly 125°, making it unbearable. To solve the problem, our team applied 1" of AccuFoam® closed-cell spray foam across the interior. Closed-cell spray foam is rigid, durable, and easy to clean—perfect for shops and garages. After installation, the building now stays much closer to 80° even without heating or cooling. With HVAC planned for the future, this project sets the stage for maximum comfort, energy efficiency, and protection for years to come.

This Corinth, TX homeowner struggled to keep their house comfortable no matter what they tried. After some investigating, they realized the attic was spiking to over 150° in the summer, trapping heat above the ceiling and pushing cool air out of the home. The result was an HVAC system that could never keep up and rooms that were always too warm. Our team provided the solution by removing the old insulation, sealing cracks and gaps in the sheetrock to stop air escape, and then installing a fresh layer of Jet Stream® blown-in insulation. This created the thermal barrier the home needed, keeping the heat in the attic where it belongs and the cool, conditioned air inside the living space. The result: balanced indoor temperatures, less strain on the HVAC system, and energy bills that finally reflect a more efficient home.

Open-Cell vs. Closed-Cell Spray Foam — Open-cell offers sound absorption and flexibility, while closed-cell provides a rigid, moisture-resistant barrier with maximum insulation power. Each has unique benefits depending on your project needs.

This 1,500 sq. ft. Fort Worth home struggled with uneven temperatures in the master bedroom and nursery, plus $450 average electric bills. The attic only had about 8" of outdated insulation (5" below building code). Our team removed the old insulation, sanitized the attic, sealed air leaks, and installed 17" of Jet Stream® Ultra blown-in insulation. Immediately, the HVAC system began cooling consistently, finally cycling off instead of running nonstop. The homeowners now enjoy a more comfortable home and should see significant energy savings.

Talk about a fun project! This customer was converting a bus into a custom RV and needed insulation that could handle life on the road. Metal shells like buses trap heat in summer and leak warmth in winter, making spray foam the perfect solution. Our team sprayed the interior with AccuFoam® spray foam, creating an airtight, energy-efficient barrier that will keep the RV comfortable in every season. Not only does spray foam add comfort, it also strengthens the structure and reduces road noise, perfect for a tiny home on wheels.

This Dallas, TX homeowner wanted to turn his garage into the ultimate man cave, but the space was sweltering in summer, freezing in winter, and anything but comfortable. Garages often lack proper insulation, which means outside temperatures easily transfer in. Our team transformed the space by adding insulation above the garage ceiling, insulating the walls, and installing custom insulation paneling on the garage door. The result is a space that holds temperature year-round, giving the homeowner a comfortable, energy-efficient retreat to enjoy. Now, his man cave isn’t just a garage, it’s a livable extension of the home.

This Dallas, TX home was facing more than just heating and cooling problems the family was battling constant dust and poor indoor air quality. Old, breaking-down insulation in the attic had deteriorated over time, allowing dust, fibers, and outside allergens to drift into the living spaces. On top of that, uneven insulation and air leaks were putting extra strain on the HVAC system, leading to hot and cold spots throughout the home. Our team delivered a complete attic refresh: we removed the old insulation, sanitized the attic, sealed cracks and air leaks, and installed fresh, high-performance insulation. This not only created cleaner air and reduced dust but also helped stabilize indoor temperatures and relieve stress on the HVAC system. Now, the homeowners breathe easier with a healthier living environment while also enjoying improved comfort and lower energy bills.

This Temple, TX home already had insulation in decent condition, but it simply wasn’t enough to handle the unique design of the house. High ceilings and tricky rooflines created constant heating and cooling challenges, leaving the HVAC system running overtime and the family struggling to stay comfortable. Our team provided the solution by converting the attic with spray foam. We carefully removed the existing insulation, inspected and sanitized the space, and then applied 5.5" of AccuFoam® open-cell spray foam across the roof deck. By sealing the attic and controlling airflow, we turned a difficult design into an energy-efficient system. The result: a home that holds temperature more consistently, reduced strain on the HVAC, and a family finally enjoying comfort in every room, without the frustration of skyrocketing utility bills.